You don’t have to get loads of wires ready to get thermal image cameras ready for use in your property. You can use a thermal IP camera to keep tabs on everything you want to find in your space. This all works without the annoying connections that might struggle to work at times.

The Main Point
An IP camera is an interior or perimeter security unit that you can monitor through online signals. With this, the camera will connect to a secure Wi-Fi network or other online signal produced within your building. The camera can then be read by a compatible program linked up to your Wi-Fi network.

After you open up the program, you can look for the cameras that are linked up to it from within your property. You can use the program to see what is happening based on what the cameras are reading and even find details on what those cameras recorded earlier in the day.

A Simple Interface
The important part of a thermal IP camera is that the program makes it easier for you to identify what is in a local area without worrying about wires or other difficult connections. You only need a clear connection between the camera and your computer to see what is happening in a space. The link may be stronger if you are physically closer to the camera from your computer.

How Are the Cameras Powered?
Each thermal camera you utilize may be powered by a small battery or through a basic connection to a local plug. Either way, it should not be hard to get a camera ready to work. Check on any secondary power features that might be included on your camera so it can keep working even when the power stops.

Infratherm will proudly help you find a thermal IP camera setup for use in your business. Be sure to see what is available from the company when finding something that fits into your property.

While it can help to have a thermal camera mounted somewhere around the perimeter of your property, it might be even better for you to utilize a small attachment that can go onto your smartphone. A thermal camera smartphone unit can be utilized on your device to give you real time infrared or thermal signature data right through your phone while using a special series of lenses for identifying what is in a space.Smartphone Thermal Camera

You only need a few steps to get an attachment ready on your camera:

1. Start by plugging in a small infrared camera unit into the charging port on your phone. The unit should be compatible with your specific phone. Also, the unit should be easy to utilize, what with most charging ports coming on the bottom parts of phones.
2. Set up the appropriate thermal camera smartphone app that links up to the device you added onto your phone.
3. Open up the camera app. This should be separate from the main camera app on your phone.
4. The attachment on the bottom produces signals that focus on gathering infrared heat. The signals come from a series of lenses on its body. These are used in lieu of the basic camera that comes with your phone.
5. The attachment will provide you with full information on the heat signatures in an area.
6. You can also control the camera by zooming in and out as necessary or by changing the sensitivity of the camera. The features will vary based on the unit and software you utilize.

​The key about using a thermal camera smartphone attachment and app is that this gives you quick access to the thermal data you want to find in any situation. Talk with Infratherm if you need extra help with finding a smartphone program that gives you the power to see anything from any spot.

You can find information on what a thermal camera in your property is reading by checking on your Android-powered smartphone or tablet. A thermal camera Android program will help you identify what is in an area through a unique setup.

Here’s how you can get one of these programs to work alongside an FLIR unit. The process should take a few moments for you to make it ready:

1. You would have to load a thermal camera program onto your Android device.
2. Next, the program has to be linked to a compatible camera in your property. This includes something that can work with a Wi-Fi or Bluetooth link.
3. The Android app should confirm a connection to a compatible camera.
4. As the connection works, the app should review what is on the camera lens. You can get information on all the heat signatures that the camera is reading in real time.
5. You may also use the setup to control the physical features of the camera provided you are close enough to it. This includes features like how the camera is zooming into a certain space.
6. The camera may also gather information over time. You can rewind whatever the camera might have recorded within a given time and use it to figure out what has been going on somewhere.

​This can work well for many camera models. Check on whether the camera you want to use is compatible with your Android device. You might need an app that matches up with the certain brand that the camera comes from.
Be aware of how your thermal camera Android program might work when you’re aiming to get a software program to work for you. Check on what Infratherm can do for you when you need assistance with getting the most out of one of these cameras.

You can get many infrared camera units added around your property for your perimeter security needs. But you must look at where you are adding those cameras. This short guide should help you recognize some of the choices you have for getting these cameras applied around the perimeter of your home or business site.

Review Entry Points
You must get cameras applied around all the entry points to your property. These include front and back doors alike plus any windows that might be accessible from the ground. Having cameras that work well on most surfaces is always a plus for when you need to monitor more items anywhere.

Check On Storage Areas
You can use perimeter security cameras around any storage areas you need help with. These include cameras that may be placed outside of a warehouse and even some that will go around the inside. Such items will help identify when vehicles and people might move into a property.

Machine Rooms Need Cameras
Don’t forget to add your cameras to a machine room if you have one. An infrared camera may be utilized to see what is happening around any machines used to power up a room or manage other functions of value. The heat signatures produced by your machines can be reviewed to see if any of these units are not working as well as you might have hoped.

High-Traffic Areas Work
You can always get a camera added in a high-traffic space. You can use this in a hallway or entry point among other spaces. More importantly, the camera may work in a space that might be dark but could still be a space where lots of people might be found in.
Be aware of how your perimeter security needs can be supported through many FLIR cameras. Check with Infratherm to see how well you can get a camera ready for your security requirements.